About lapkei2

lapkei2 · 03-02-2016

Does ASR1002 supports dot1q subinterface mapping to each vrf in a Port-Channel? and with BFD enabled? For example ASR1002#conf t interface Port-channel1no negotiation autono bfd echolacp min-bundle 2 !!interface GigabitEthernet0/0/1no ip addressno n...

lapkei2 · 04-12-2012

CPT600 running with CTCR95. There are 3 FOGs,Group ID 39 - FOG39 - Ten GE Port 1 of Slot2 PTM-4 card and Ten GE Port 2 of Slot2 PTM-4 cardGroup ID 37 - FOG37 - Ten GE Port 1 of Slot4 PTF-4 card and Ten GE Port 2 of Slot4 PTF-4 cardGroup ID 38 - FOG3...

lapkei2 · 03-03-2016

So, as the bfd neighbor is on vlan 101 and vlan 201, the actual configuration will be? ASR1002#conf t interface Port-channel1 no ip addressno negotiation autolacp min-bundle 2 !!interface GigabitEthernet0/0/1no ip addressno negotiation autochannel-g...

lapkei2 · 03-02-2016

Thanks, I read it before as it doesn't mention about VRF and BFD on port-channel

lapkei2 · 03-02-2016

so, the command is supported for port-channel subinterface with dot1q and vrf mapping?

lapkei2 · 03-02-2016

Thanks Philip, How about port-channel subinterface with dot1q and vrf mapping?

lapkei2 · 04-12-2014

Any ways to show Average Waiting time and Talking time in last one hour instead of 00h00-23h59?? Thanks

Member Since	‎04-12-2006 01:07 AM
Date Last Visited	‎07-18-2018 12:03 AM
Posts	14

User Statistics

User Activity

dot1q subinterface mapping to each vrf in a Port-Channel of ASR1002

Provision Error on Fan-Out-Groups Deletion

So, as the bfd neighbor is on

Thanks, I read it before as

so, the command is supported

Thanks Philip, How about port

Any ways to show Average