I have to setup a Site 2 Site tunnel with a business partner and I have 4 seperate networks that need to go to one network on the remote site.Problen is that I have to NAT one of the source networks to a different network but leave the other 3 alone....
When setting up a site-2-site vpn, do I need to setup an access list to alow the traffic from the remote network to the local network or does the remote network automatically have access to the local network?
Thanks for the help. I added the changes but I still cannot get the tunnel to establish. Problem is that the other site is in a different time zone and I can not debug with them until tomorrow.Here is my partical config and 2 different packet tracer ...
Sorry for the confision.Here is the full configASA Version 8.4(2) !hostname asa5510-3domain-name tag.comenable password 8Ry2YjIyt7RRXU24 encryptedpasswd 2KFQnbNIdI.2KYOU encryptednamesdns-guard!interface Ethernet0/0 nameif outside security-level 0 ip...
I should of specified that I am setting this up on an ASA5510 running IOS 8.4.2.The commands that you posted don't work. Do you have any examples for an ASA5510 running IOS 8.4.2?
