About Koblensky

Koblensky · 02-07-2012

Hi all,this is really a newbie question!! i have a mail server inside my network pointed lets say by mail.mydomain.com -> X.Y.W.Z (my external ip address) on interface GigabitEthernet0:interface GigabitEthernet0/0 description $ETH-SW-LAUNCH$$INTF-INF...

Koblensky · 09-29-2011

Hi all,i'm would like to set a non standard ssh port with the following cmd:1) ip nat inside source static tcp 192.168.1.45 22 MY.PUBLIC.IP.3 12345 extendablebut it doesn't seems to work, if i do 2) ip nat inside source static tcp 192.168.1.45 789 M...

Koblensky · 09-12-2011

Hi all,i've been using a the classmap "class-map type inspect match-any min-cls-insp-in-out" in a policymap "policy-map type inspect min-pm-in-out" in the zone security "ccp-zp-in-out source" for my firewall. I've just noticed a "match protocol Othe...

Koblensky · 04-13-2010

Hi All,i've been struggling a little bit with internal services (as WWW) to be accessible from my external public ip address. I've remved firewall and particular configuration and left "only" nat, i'm interested in let 10.0.102.8: 80 to be accessible...

Koblensky · 04-02-2010

Hi all,i've setup a basic routing infrastructure with vlans, the cisco (GE0/0 208.105.69.43, GE 0/1 vlan local) is attached to the cable modem (208.105.69.41).if i ping google from the cisco it goes fine:blackDevil# ping google.itTranslating "google....

Koblensky · 02-08-2012

#sh ip port-map Other ^% Invalid input detected at '^' marker.i was wondering what happens if you do the following:set a "ip port-map user-protocol--1 port tcp 3283" set a "match protocol "user-protocol--1" on a class maprem...

Koblensky · 02-08-2012

its seems that if the router has an ssh service it doesn't allow to set nat on ssh, i've resolved setting a dmz ssh server on a non standard port.Let me know if you have a different experience,thanks!!

Koblensky · 02-08-2012

yap ... my mistake: on the laptop the DNS was statically assigned, thats why it was not been updated by local dns!thanks ... it works well with the original dns settings

Koblensky · 02-07-2012

i've tried to vpn to the router and it works just fine:the ip received is of the same network i'm having issues:utun0: flags=8051 mtu 1280 inet 10.0.102.199 --> 10.0.102.199 netmask 0xffffff00and this is the interface of the vpn tunnel:interface Virt...

Koblensky · 09-29-2011

anyone has an idea? google doesn't gives any hint ... thanks !!

Member Since	‎04-02-2010 12:05 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	14

User Statistics

User Activity

NAT between 2 internal networks and from outside/inside

static nat on port 22 (ssh)

match protocol Other

NAT port forwarding not working (WAN, NAT, VLAN, WWW internal server)

no dns request forwarding with vlan

match protocol Other

Re: static nat on port 22 (ssh)

NAT between 2 internal networks and from outside/inside

NAT between 2 internal networks and from outside/inside

match protocol Other