About Himanshu_Dwivedi

Himanshu_Dwivedi · 06-09-2025

Hi,I would like you to examine the scenario below; this was meant to be tested in the customer's environment. I opened the packet tracker and attempted to create the same topology, but it isn’t functioning , so I would like to find out if it will wor...

Himanshu_Dwivedi · 03-22-2025

I am dealing with the scenario where customers has multiple switches and they want that all the switches use different VLAN for RSPAN i.e SW1 Vlan 10, SW2 Vlan 20 and so on. I have sniffer connect to the main switch, is there any possibility to get m...

Himanshu_Dwivedi · 03-10-2025

Hello Team,I am using 15 QTY of IE-3400 Switches in Customer environment and all are forming a Ring using REP Protocol. Everything is working fine. I can see that some automatic configuration changes is happening randomly in the configuration of swit...

Himanshu_Dwivedi · 01-16-2025

I have 6 IE3300 as access switches in a ring and configured with RSPAN and IE4010(In HSRP) acting as core Switches, I have sniffer connected on both IE4010 switches, but not getting data in sniffer. I believe RSPAN support in Ring/REP topology, any s...

Himanshu_Dwivedi · 12-07-2024

Hello,Please consider below topology in which I have 1 core Switch which have 2 SVI VLAN 10(192.168.10.1) and VLAN 20(192.168.20.1) and 2 access switches(IE3300) which are acting as layer 2 device. AS1 has 2 PC connected and AS2 also has the same. Al...

Himanshu_Dwivedi · 06-10-2025

This scenario I tested and working fine, I was just finding the solution by translating the IP address which is other than the WAN IP Address in this case it is 1.1.1.0/24.

Himanshu_Dwivedi · 06-10-2025

Please find the the attached config files.

Himanshu_Dwivedi · 06-10-2025

Please let me know possible way to achieve this.

Himanshu_Dwivedi · 06-10-2025

Static route is already present and I can see it in a routing table, the routees priovided by sidshas03 worked.

Himanshu_Dwivedi · 06-10-2025

Appreciate your response and the suggestion provided by you worked. Thank you so much

Member Since	‎09-10-2022 10:07 PM
Date Last Visited	‎06-10-2025 06:31 PM
Posts	98
Total Helpful Votes Received	24

User Statistics

User Activity

NAT SCENARIO NOT WORKING

Multiple RSPAN Vlan and send to Destination interface

Configuration Automaticallly Getting change randomly IE3400 Switch

Does RSPAN work with REP Ring Topology

IE3300 Layer 2 NAT Per All

Re: NAT SCENARIO NOT WORKING

Re: NAT SCENARIO NOT WORKING

Re: NAT SCENARIO NOT WORKING

Re: NAT SCENARIO NOT WORKING

Re: NAT SCENARIO NOT WORKING