About tolinrome tolinrome

tolinrome tolinrome · 02-21-2024

Hello,I have a 2960X trunked to a Nexus 9K.On the 2960 the trunk port amber and is:switchport trunk allowed vlan 10,100switchport trunk native vlan 100switchport mode trunkOn the 9K the trunk port is green and is:switchportswitchport mode trunkswitch...

tolinrome tolinrome · 11-22-2023

Hi all, I'm replacing a switch and see this route map on it, but I don't seem to see how its applied to anything. Can someone please let me know step by step how this is being processed? # sh run | i route-maproute-map ospf-redist permit 10redistribu...

tolinrome tolinrome · 11-20-2023

Hello,I would like to downgrade a Cisco Cat9300 switch. The switch is a single stand alone and is in "install mode". I would be installing the .bin file. What command should I use to downgrade the switch and how do I get it back to the current versio...

tolinrome tolinrome · 12-14-2022

Hello,What are the commands I can use to copy the crashinfo_ext file to my tftp server?I need to find out why the stack member rebooted for no apparent reason.Thank you. 2960X-STK-01#dir flash2:Directory of flash2:/2 -rwx 111827 Dec 14 2022 12:25:05...

tolinrome tolinrome · 05-13-2022

Hello,I need to have data encrypted between two switches (Nexus 9K) and the encrypted data needs to be FIPS-140-2 certified.Is enabling MACsec on the switch enough to have FIPS-140-2 certified or do I need to only put the switch into FIPS mode - or d...

tolinrome tolinrome · 02-22-2024

Note: It is only the 2960X switch that has the solid amber LED, the 9K is Green solid.

tolinrome tolinrome · 02-22-2024

I have new vlans and the same thing. Here's the output as requested.I have a 2960X trunked to a Nexus 9K.On the 2960 the trunk port amber and is:switchport trunk allowed vlan 170,949switchport trunk native vlan 949switchport mode trunkOn the 9K the t...

tolinrome tolinrome · 11-28-2023

Thank you everyone.

tolinrome tolinrome · 11-28-2023

Thank you everyone for your excellent replies. All solutions were correct, I accepted the one that was easier for me to follow.

tolinrome tolinrome · 11-22-2023

I do not want to go to bundle mode. I just want to downgrade 16.6.9.

Member Since	‎04-16-2012 08:58 AM
Date Last Visited	‎02-23-2024 12:04 AM
Posts	158
Total Helpful Votes Received	22

User Statistics

User Activity

Two Switches Trunked - ports are amber on one and green on the other

Understanding a route-map

Downgrade Cisco 9300 Catalyst Switch

How to retrieve crashinfo to tftp server

MACsec - FIPS 140-2 encryption between Switches

Re: Two Switches Trunked - ports are amber on one and green on the oth

Re: Two Switches Trunked - ports are amber on one and green on the oth

Re: Downgrade Cisco 9300 Catalyst Switch

Re: Understanding a route-map

Re: Downgrade Cisco 9300 Catalyst Switch