Call to a DID received, but not able to communicate upon connectionCUCM 11.6Tried on several different 7962 desk phones with the same DID, so not a hardware issue.
I am having an issue with an IP Communicator through VPN. The IP Communicator is able to be configured and the remote user hears dial tone when going off hook, but there is no audio either way when a call gets connected. I tested cleanly on a laptop ...
I am trying to establish connectivity between 2 2611XMs using standard WIC DSU T1 V2 serial interfaces between the US and the UK. Line provider tells me the line is good all the way through, but I cannot connect. British Telecom states I might need t...
I'm not familiar with the type or extent of trouble shooting for this type of issue. I have used different hardware to exclude malfunction, but I am still experiencing the issue of being able to answer the call, but no communication happens either wa...
Aha, I think that might be the issue:admin:utils ntp statusntpd (pid 9459) is running...remote refid st t when poll reach delay offset jitter==============================================================================10.14.0.240 .INIT. 16 u - 1024 ...
