About lilljarrell

lilljarrell · 08-07-2018

Anyone know what this error is? Or Which VTT its referring to? I have a pair of VSS 6807-XL with quad Sups - I know that each chassis has 3 VTT modules, i am unsure where the error is pointing to? %C6KENV-SW1-4-VTTFAILED: VTT 8 failed %C6KENV-SW2_STB...

lilljarrell · 05-22-2015

Installing 5 new VG350,s, have 2 installed and randomly they have no dial-tone. I have practically read thru all the discussion on VG's and found this same problem using SCCP & in fact changed the In Hold-Queue to 300. I have 2 i had to put back on m...

lilljarrell · 06-27-2019

I found where some folks moved the plar from the CUCM to the VG, and it works fine now, also as Bug CSCe01737 suggests. The only thing is, the PLAR gets a dial tone after the called party hangs up even having the no tone dial-tone remote-onhook confi...

lilljarrell · 06-26-2019

Did you ever find a solution to this, i am dealing with this, i am getting ready to open a TAC case as I cannot find anything on the community of why this is happening. There seems like there should be some setting or timer. Thx

lilljarrell · 10-16-2015

Well, i just got another port today that just has a fast busy on it. Did a shut/no shut on the VG port and reset it in call manager did not fix. I had to move the line to a different port and have the VG set to reload tonight because that seems to be...

lilljarrell · 10-07-2015

The only parameter added on the voice-ports for me was the disconnect-ack option, but not sure that fixed the problem, we have not had any problems or complaints since. I dont have the ports shutdown on the VG, they just are not configured in the UCM...

lilljarrell · 06-05-2015

I can access the RTMT, but honestly not sure how to use it. The only resources i have registered are the CUCM MTP points.

Member Since	‎12-13-2007 04:55 PM
Date Last Visited	‎03-04-2020 12:17 AM
Posts	9
Total Helpful Votes Received	1

User Statistics

User Activity

6807-XL VSS with Quad-Sups

Random no dial-tone on mgcp vg350

Re: VG350 with PLAR - keep getting call backs after hang up

Re: VG350 with PLAR - keep getting call backs after hang up

Well, i just got another port

The only parameter added on

I can access the RTMT, but