We have a Cisco Model ISR4321/K9 router with Cisco IOS XE Software Version 16.09.04The problem occurs when we make a call forward to an external number.The call made by User A to the destination User B (user B has activated a call forwarding to anoth...
We have a Cisco Model ISR4321/K9 router with Cisco IOS XE Software Version 16.09.04The problem occurs when we make a call forward to an external number.The call made by User A to the destination User B (user B has activated a call forwarding to anoth...
Hello Roger,If I had thought of doing it that way.but as I mentioned before, it is only for a "Virtual" number, which does not exist in the PBX.Thank you very much for your valuable collaboration and recommendations.Have a nice dayBest regards,
Hello TechLvr ,This configuration was for a special requirement. (temporary for a single number)Since physically in the PBX there is no device and there is no internal number eitherThank you very much for your commentsBR,
Hi Roger ,I have configured the external forwarding in the Cisco Router.Example :voice register globalmode cmesource-address 172.20.XXX.XX port 5060max-dn 10auto-register!voice register dn 2number +49xxxxxxxxcall-forward b2bua unregistered +49xxxxxxx...
.jpg "VIP Expert"){kind=icon}
