Hello all!I have a valcom paging system off of an FXS port. Calls come in, are transfered to the FXS port (x250). The ring voltage causes the paging system to emit a warble to tone so the plant floor knows the phone is ringing at night. The proble...

Hello all,I have a problem where i need callers to be able to press 4 and the system will dial extension 250, this extention will be directed to a valcom paging system that will generate warble tone in a plant. The answering party will then just do ...

Hello all,Right out of the box, the canned CUE AA works just fine, except i need to make a "hidden" step users can take.I need users to be able to press 4 without any prompt and be forwarded to an extension. Their old PBX has this feature in its AA ...

Hello all,I am running CME 3.3 and have a PRI to the PSTN. When a call comes in from the PSTN the phones display the calling number, but not the calling name. According to a q931 debug, i am receving the facility IE with the calling name as i can g...

Hello all again,I have a 7960 with 6 PSTN lines on differnt buttons. When a call comes in on any line the phone rings normally. When a second call comes in on any of the others lines while the receptionist is still on the line all you get is a litt...