About msaeedi

msaeedi · 02-27-2018

dears have a good day i have the following scenario, i have three internet providers ISP with three Links terminated on three different local routers ( ISP 1 ---> R1 , ISP2 ----> R2, ISP3 -----> R3 ), each ISP think he is alone ISP, and each ISP ma...

msaeedi · 12-24-2015

i have project that contain the following scinario : i have CUCM Publisher , Cisco unity connection, Cisco Expressway- E , Cisco Expressway - C all these machine have been installed running fine, i need to know the scinario of configuration ( i need...

msaeedi · 12-15-2015

i have CUCM 10.5.1 and i need to reset web password on that call manager , i know the command to do that : utils reset_application_administrator_ui_password , but im afraid if i apply it on the call manger and i cant login again , how i will change...

msaeedi · 12-08-2015

i have installed CUCM and gateway , on the CUCM gateway is added as sip trunk , i created route pattern on CUCM and dial peer on gateway , digit manipulation is done on CUCM ( Predot ) , i connected to PSTN via FXO , i created dial-peer on gatway and...

msaeedi · 10-22-2015

i have a cluster consists of CUCM Publisher and two CUCM Subscribers , auto registration is disabled on Publisher and enabled on Subscriber 1 and subscriber 2, also i have tow CM Groups as below : CMGROUP1 :subscriber 1subscriber 2Publisher Auto reg...

msaeedi · 11-09-2020

and to open the file you will need the program 7zip

msaeedi · 07-14-2019

I prefer to do explanation of TCL script itself, so the topic will be completed.i dont know where this script configured i mean is it available by default in router flash, could you illustrate that in more detailed and focusing on TCL script. thanks ...

msaeedi · 07-14-2019

Broken URL !!

msaeedi · 07-14-2019

very informative and beneficial for those who worked in a presales field

msaeedi · 07-14-2019

For small business switches, it is better to do upgrade using web , however you can upgrade the firmware using cli but to make sure check the below points :check that you've uploaded the image or firmware or binary file to the switch flash.check if t...

Member Since	‎04-26-2015 02:14 PM
Date Last Visited	‎02-09-2023 11:38 AM
Posts	41
Total Helpful Votes Received	5

User Statistics

User Activity

BGP dual Homed on different local routers

VCS Expressway configuration

Reset Application Password on CUCM

have problem of ouside dialing

Auto-registration not work

Re: Dumping CUCM Fresh Install Logs - Virtualization

Re: B-ACD and Auto Attendant services on CME

Re: SF300-48P Online Device Emulator

Re: SMB Switch Transition Guide

Re: sg350x image upgrade with tftp