I've got one inside interface, one dmz interface and one outside interface on my firewall.Then the inside interface connects to a 24 ports EMI 3550 switch. The dmz connects to the same switch from its firewall interface. I've used policy based routin...

firewall connected to EMI 3550 switch.The ip route command on EMI 3550 is:ip route 0.0.0.0 0.0.0.0 10.10.10.1where 10.10.10.1 is the inside interface of firewall and is the gateway of last resort.now, i connected another cable from same switch to dmz...

The firewall has 3 interfaces:1 goes to external (router and hence internet), 1 inside interface for internal network (connectes to EMI 24 ports 3550 switch) and 1 dmz interface.I've connected the inside to let say fastethernet port 1 on switch 1. On...

I am connecting a 3550 switch to the internal side of firewall. The 3550 switch is then trunked to another switch through giga (Switch 2), and then switch 2 is trunked to switch 3 through giga port (daisy chain).There are 2 staff vlans in switch 1 an...

I just searched the internet over and cant find much about ip route. Just a quick question:i've got a firewall connected to a 3550 switch. there is a management vlan, vlan 2 and vlan 3. if vlan 2 is a network 10.10.0.0 and vlan 3 is a network 172.16....