Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Am I correct that Line 1 Tab GW1-4 Password fileds are not use for logon the gateways while GW1-4 being specified in User 1 Tab "Call Forward Settings" ? For example if I set, "Cfwd All Dest: 1000@gw1" I found only "SIP/2.0 302 Moved Temporarily" wa...
To Cisco,Few days ago I asked the question below:https://www.myciscocommunity.com/message/37656#37656I appreciate the quick respond from Dave but I have received no further follow up so I conducted my own test over the past week end and figured out t...
I found VoIP A/C will failed registration with my VSP whenever my Firewall external IP changed. Reboot the SPA3102 cannot help, I have to remove the VSP domain from the "Proxy and Registration -> Proxy" field "Submit All Changes" and re-input the fi...
I would like to know the usage of:Regional -> Call Progress Tones -> Busy Tone:andPSTN Line -> PSTN Disconnect Detection -> Disconnect Tone:are they the same and which one will affect the problem as explained below?The reason I ask this question is t...
According to the document:Routing calls between PSTN and VoIP with a SPA3102Looks to me both Line 1 and PSTN Tab are share the same ITSP VoIP A/CIn the example of VoIP-To-PSTN Gateway, when caller call ITSP DID number, how can we know it will connect...
You may need to figure out the Disconnect Tone parameter of the PSTN network and redefine them in Regional Tab and PSTN Line Tab. Most likely the SPA3102 doesn't recognize the disconnect tone, on some network, even if the parameter is correct, it fai...
Depend on how you want it works... Call the 718 registered on Line 1 Tab, it will ring the analog handset attached to the SPA3102. In User 1 Tab, you can setup the call to be forwarded on no answer (Cfwd No Ans Dest) to gw0 and (Cfwd No Ans Delay) t...
Before you mess with DP, did you get the 718 number working with your SPA3102? i.e. you need to register with VSP who provide your 718 sip number in Line1 Tab. If this works, someone call your 718 sip number will ring the analog phone attached to th...
