random_camden
Level 1
Level 1
Member since ‎06-15-2006
‎08-18-2017

User Statistics

  • 46 Posts
  • 0 Solutions
  • 4 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
20 Replies
10 Replies
5 Replies

User Activity

We have 300+ 887VAG and VAMG routers out in the field running DSL and 3G.They all work fine on Day 1, but after a while (we don't know how long) the cellular interface goes into the following state.A shut/no shut of the controller or the interfaces d...
Is it possible to change the Ethertype used on a ME3400 switch (12.2(55)SE).Our carrier uses 0x8100, but when we configure a QinQ port and send double-tagged packets to them, I think they  are going out ax 0x88a8.I've found commands to do it on a 10K...
I setup a connection between two Ethernet Subinterfaces, each on a seperate vlan.At the other end of the trunk (on a switch), the port goes into BKN (broken) mode as bpdu's from VLANa are now appearing on VLANb (because of the connect statement on th...
Can I setup a Pseudowire between to subinterfaces on the same router (7206).We take multiple VLAN's from a carrier over a trunk connection. I want to be able to pseudowire between two of these sub-ifs (and then apply some form of vlan translation??) ...
Hi AllI have a pair of Cisco ME3400G-12CS switches running resilient WAN ethernet circuits.I believe the CAB-SFP-50CM= SFP patch cable will allow me to stack them, but it's only 50cm long.My two devices are in two different data centres, joined with ...
Community Statistics
Member Since ‎06-15-2006 12:58 AM
Date Last Visited ‎08-18-2017 03:50 AM
Posts 46
Helpful Votes Given To