On a Nexus 5000 switch with SFP+ modules. Can I stuff the switch with SFP modules for 1G BASE T via RJ45 use?I need a 10G switch with SFP+ and a dozen or so 1G BASE T with room for minor expandability.Thanks!

Hi,Looking for a switch solution which could support 16 ports of 10GbE via XFP, and about a dozen 1GbE RJ45 ports.I looked at the Nexus 5000, but as far as I can tell it only offers 12 x 10GbE ports.I need something with some serious backplane. Our l...

My IOS: s72033-ipservicesk9-mz.122-18.SXF12.binI cannot do a: "copy tftp const_nvram:vlan.dat"After a successful tftp transfer, the switch immediately responds with an error to the effect of , "cannot write to const_nvram".This command works with thi...

Hi,Have a 6509, sup720. I have a vlan with a multicast stream flooding it. Cannot use IGMP as a few of the switchports are connected to old devices which do not do IGMP, but need to listen to the MC stream. I have a few ports in that same vlan which ...

Hello,I have a 6509, Sup720's running 12.2-18.SXD7b.We PXE boot a large number of machines.We have DHCP leases set for 5 minutes. The low lease time is due to items being swapped out for sparing purposes.They cannot use the next IP address in the sc...