Dear expert,I enter the following line into my router:ip nat inside source static tcp 192.168.2.1 81 <public ip> 81 route-map nonatThe command works fine. when I look the ip nat translation, I can see it.The problem when I list tunning config, the li...

Greetings, I have a ASA 5510 at work and I want to link my home network with my office network. I'm using Cisco VPN Client for Linux, but using this I don't know how to make my home network available from my office. At home I'm using 192.168.34.0/24 ...

Dear Expert,I want to setup a tunnel between a PIX 515e using IOS 6.2 and a ASA 5510 with IOS 7.0.After setting up the tunnel both site (the two devices are in the same room for now), the tunnel never goes up. If I use the same PIX 515e with a PIX 50...

Hello all,I'm having a strange problem with my ASA 5510. After activate the telnet server, when I'm issuing the telnet command from an allowed workstation, it will connect, but will disconnect before I get login prompt:[host]:/home/user> telnet 10.32...