About swilsonnc

swilsonnc · 11-27-2022

Hi, I am in need of a little guidance here. I currently have a working 3750x and 4948-10GE multicast routing setup that works just fine. The 3750 and 4948 both have Vlan10 and a subnet of 10.100.1.0/24 for the multicast network. They are connected...

swilsonnc · 12-09-2022

Actually, I may have found a work-around sort of. Apparanetely the Juniper did not have pim enabled on the vlan or interface and that is why it wasn't being flooded. I used my test 4948 and disabled pim on the vlan and it seems to be working fine t...

swilsonnc · 12-09-2022

So the attempt at the access-list on the group did not work. It has no affect to set the access-list to permit a MC group. If I permit the source ip that the group originates from then it works but allows all of the MC groups from that IP. If ther...

swilsonnc · 12-06-2022

Thank you, I will give this a try and see what happens.

swilsonnc · 12-01-2022

Thanks, that makes sense and Ii will try that. Would the 3750X or the 4948-10GE be able to run as the RP (would I have to enable ip routing)? If not I am guessing I would have to configure a router-on-a-stick as the RP?Lets say I tried this. Would...

swilsonnc · 11-30-2022

Thank you for the reply. It was setup with 2 different Vlan's before and I have tried it that way a few different ways. It seems I just cannot keep the 1Gig link from flooding (maybe that is by design and there is nothing I can do). I have tried c...

Member Since	‎11-27-2022 10:17 PM
Date Last Visited	‎12-14-2022 01:41 AM
Posts	6

User Statistics

User Activity

3750X and 4948-10GE Multicast Video

Re: 3750X and 4948-10GE Multicast Video

Re: 3750X and 4948-10GE Multicast Video

Re: 3750X and 4948-10GE Multicast Video

Re: 3750X and 4948-10GE Multicast Video

Re: 3750X and 4948-10GE Multicast Video