About kumarsh

kumarsh · 10-19-2006

Hello,I have got a query on Etherchannels. Is it possible to make an L3 etherchannel on one side connected to the L2 etherchannel as a trunk on the otherside.if so, Whatz the reqd configuration.Any links with detailed config would be helpful.RegardsS...

kumarsh · 10-19-2006

This would be required in a case where Pure L2 switch is connected to a L3 router.I am not able to establish a L2 PAgP portchannel with ISL trunking to an L3 port-channel.I am able to establish L2-portchannel with Dot1q encapsulation but not ISL.

kumarsh · 10-19-2006

not sure if it is of a complete help.Since ur words say both "in" and "out" traffic should go to the FW.Why don't u use Span to Capture and pump out on an interface connected to the Firewall...then it will travel to the FW+BW Manager and then comes b...

kumarsh · 05-04-2006

which version of the image are u using ??Try to upgrade to the latest image and try, might be a bug.

kumarsh · 05-04-2006

Monitor ports ingress traffic will be dropped and so you will not be able to establish the network connectivity with the Analyser

kumarsh · 05-04-2006

You can establish etherchannel with both sides as ON-ON, With this no protocols will be used.Instead if you want protocols,Say for PAgP:Auto-Desirable or Desirable-Desirable worksFor LACPActive-Active or Active-Passive works.If both the sides are sil...

Member Since	‎09-14-2005 03:14 AM
Date Last Visited	‎06-21-2019 10:44 PM
Posts	7
Total Helpful Votes Received	5

User Statistics

User Activity

Connecting L2 etherchannel to a L3 etherchannel

Re: Connecting L2 etherchannel to a L3 etherchannel

Re: Design ISP VLAN Scenario

Re: VLAN on 6506

Re: Port monitor not allowing local traffic...

Re: Etherchannel question