Hello to all,before i explain my problem i would like to show you my network:vlan 1-20 mac web server (ip 192.168.1.2) -------------> core switch (vlan 1 ip 192.168.1.1, vlan 6 ip 172.16.0.2) ---------------> cisco router (vlan 6 ip 172.16....
Hello,Finally i managed to fix the issue with the vlan at the core switch, the problem was with the NAT and the ACL. The config is the following:ip nat inside source list 110 interface Ethernet1/0 overload!!access-list 100 permit ip 172.16.0.0 0.0.0....
Hello Mohammad,i applied the access list and the show command is the following:Extended IP access list 105 10 permit icmp host 172.16.1.6 host 10.0.0.2 20 permit ip any any (292 matches)I applied it to the interface but couldn't ping the server...