About Joe De Lange

Joe De Lange · 10-30-2015

Hi I have a very interresting routing issue with the Cisco ASR 903 Metro Services router. I have iBGP setup between 2 internal routers and eBGP between 2 providers. Provider 1 only sends a default route to me via eBGP. Provider 2 sends me the full in...

Joe De Lange · 11-09-2015

Hi Amit Apologies for only responging now. I have been off sick for a couple of days. The ip cef output indicates that the traffic is indeed pointing to the correct provider, but the traffic is still flowing between the two routers. This is the only ...

Joe De Lange · 11-01-2015

Apologies, didnt read properly. Below is the output for the other router ( Secondary link) that only receives a default route from provider 1. show IP BGP 134.213.23.170BGP routing table entry for 134.213.0.0/16, version 1517516Paths: (1 available, ...

Joe De Lange · 11-01-2015

Hi The purpose for the multipath is to load balance, but 1 of the providers has a design issue,meaning that they cannot provide us with the full routing table at this stage.

Joe De Lange · 11-01-2015

Hi Please see below show IP BGP 134.213.23.170BGP routing table entry for 134.213.0.0/16, version 1868968Paths: (2 available, best #1, table default, not advertised to EBGP peer)Multipath: eBGP Advertised to update-groups: 3 Refresh Epoch 1 36994 33...

Member Since	‎12-05-2011 12:28 AM
Date Last Visited	‎07-23-2018 12:31 PM
Posts	5

User Statistics

User Activity

Cisco ASR 903 routing issue

Hi Amit

Apologies, didnt read

Hi

Hi