About RobotAjay

RobotAjay · 07-15-2024

Hi, I have a query.I know aggressive mode is used in case if the peer has dynamic IP's but may I know why main mode cannot be used? Can someone please explain this?Thanks

RobotAjay · 05-15-2024

This is my topology, pc1 is 10.0.0.10(Vlan 10) and pc2 is 10.0.0.20(Vlan 20)For some reason vlan 10 is not able to communicate to vlan 20, I took packet capture and I see ARP from pc1 is forwarded to switch 1 and switch 1 is forwarding it to switch ...

RobotAjay · 01-09-2024

I am configuring OSPF and while running packet captures I see at times hello packets are sent via unicast also I could see a few LS update packets are sent to a multicast address(as destination), may I know under what condition this happens?Thanks in...

RobotAjay · 12-29-2023

Please find the attached diagram. Neighborship is formed and Below is the configuration on AS2 router.router bgp 2bgp log-neighbor-changesnetwork 4.4.4.0 mask 255.255.255.0network 192.168.24.0network 192.168.34.0neighbor 192.168.24.2 remote-as 1neig...

RobotAjay · 12-22-2023

Hi, I have a small query.1.1.1.1(loopback)>>Router1>>> Router2 >>>2.2.2.2(loopback).On router 1 when I try to advertise 1.1.1.1 using the below command I don't see any hello packet going out but as soon as I advertise the physical interface(ip) it se...

RobotAjay · 07-15-2024

Could you also explain or share me some docs to know more on when peer ip is used for auth in aggresive mode and when peer id is used ?

RobotAjay · 07-15-2024

understood, so incase of main mode authentication happens with the help of peer ip.So if a client has dynamic IP and if we use aggressive mode then each and every IP(new client's or new IP) will be validated using the peer ID.Please correct me if I a...

RobotAjay · 12-31-2023

Understood, since the MED value is higher the R2 will not advertise 4.4.4.0/24 to R3(because it is not best path)Thanks for helping me out, Have a nice day...

RobotAjay · 12-30-2023

Please find the output.As you can see cuba has only one route while haiti has 2 routes, for some reason Haiti is not sending 4.4.4.0/24 to Cuba (When MED is applied only for 1 peer in As2 router).

RobotAjay · 12-30-2023

Thanks for the clarification.I do understand the IBGP rule, so as per the rule anything Cuba learnt from haiti or haiti learnt from cuba will not be forwarded to "Suriname"(As per IBGP rule)But whatever Haiti/cuba learnt from jamaica(AS2) will be for...

Member Since	‎12-23-2022 03:44 AM
Date Last Visited	‎08-15-2024 01:17 AM
Posts	20
Total Helpful Votes Received	6

User Statistics

User Activity

IPSEC VPN Aggressive mode

Vlan not working

OSPF packet capture queries

BGP MED

OSPF Query.

Re: IPSEC VPN Aggressive mode

Re: IPSEC VPN Aggressive mode

Re: BGP MED

Re: BGP MED

Re: BGP MED