Hi guys, i was configuring auth-proxy . i had am/c---(inside)router(outside)---internetnow i want that a normal user is not able to get the telnet access of my router, only certain users can have the telnet access fromt the inside. i dont want to use...

Hi guys i am a bit confused, please help me ..RTR2----(Outside)ASA(Inside)----Rtr1the outside n/w range is 192.168.1.0/24 with Rtr2 having .2 and ASA having .1the inside n/w range is 192.168.2.0 with asa having .1 and Rtr1 hving .2now i want to perfo...

Hi folks , i was trying to configure IOS easyvpn with vpnconcentrator. i am using an external group which is configured on acsserver.the configuration for ios eazyvpn iscrypto isakmp policy 10 encr 3des hash md5 authentication pre-share group 2crypto...

Hi all, i was trying to authorize the asa with acs 3.2 on priv lvl 7 using tacacs+,but the users were geting priv-lvl 15 only..aaa-server aaa_serv protocol tacacs+aaa-server aaa_serv host 10.0.0.10 key cisco123aaa authentication serial console tac_se...

i was trying to setup remote access vpn between ios router 12.3 and vpn client 4.x, using microsoft ca.. but i was unable to connect with vpn client .. i dnt knw where i m going wrong .. my rtr cfg is as followsversion 12.3service timestamps debug up...