About Sergey Kozhedub

Sergey Kozhedub · 06-17-2020

Hello All,Could anyone point to documentation on how the fabric of (dual) RSP440 operate with A9K-8X100GE line card.I'd like to know if this is just 400G for whole linecard or there are limitations per 100G port etc?Is fabric in use when traffic goes...

Sergey Kozhedub · 04-24-2012

Do you permit targeted LDP by mpls ldp discovery targeted-hello accept ... ?Regards,Sergey

Sergey Kozhedub · 02-21-2012

Hi Abdallah,You'll need 'data' license to use this feature.You can try to evaluate this license to test your configuration (if not evaluated before):http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.html#wp1155619Sergey

Sergey Kozhedub · 02-08-2012

For example you have Fa0/0 facing your mpls router, then you have 3 sub-interfaces:pseudowire-class pwc_l2tp encapsulation l2tpv3 ip local interface Loopback0int Fa0/0 no ip address mtu ...int Fa0/0.10 encapsulation dot1q 10 xconect [remote_ip_10] 10...

Sergey Kozhedub · 02-08-2012

Noticed the same log messages in 7609.Did anyone found the reason? Is it a chassis problem?

Sergey Kozhedub · 02-02-2012

Hi Ty Chan,What type of Ethernet / WAN cards you're using on R1 and R2 facing to each other?Could this be a hardware limitation?For VPLS you have to use ES/ES+ or SIP- cards.Sergey

Member Since	‎11-16-2011 08:16 AM
Date Last Visited	‎07-31-2020 04:52 AM
Posts	11
Total Helpful Votes Received	18

User Statistics

User Activity

A9K-8X100GE linecard and RSP440 fabric oversubscription

LDP Error Message--LDP Feature Set Manager: State Initialized

MPLS over PPP protcol

Re: MPLS over PPP protcol

Cisco 7609 SP: FAILED to write to DS1338 RTC device

MPLS VPLS VPN