Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
Chris Brun
Level 1
Level 1
Member since ‎06-08-2010
‎04-11-2022
Recent Badges
Awards

User Statistics

  • 9 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

Question about Dynamic NAT/PAT limits

11-05-2014
Just implemented a straightforward NAT using overload working, however, I have a question about the limits I see on the show ip nat pool command.  For example:ASR-CO-F8#show ip nat pool name ComcastLR-WLNAT Pool StatisticsPool name ComcastLR-WL, id 9...

6509 dir /all results in "No such device"

07-02-2014
I have a pair of 6509 switches, both running 12.2(33).Switch 1:  6509-I#dir /all%Error opening disk0:/ (No such device) Switch 2:6509-II#dir /allDirectory of sup-bootdisk:/    1  -rw-    54337444   Mar 2 2009 16:54:26 -05:00  s72033-ipbase-mz.122-33....

FWSM VLANs do not show up

02-08-2012
Configuring FWSM in a 6509.  When I set "firewall vlan-group 40  40-42,251", it results in: "No more than one svi is allowed. Command rejected.".  I had "firewall multiple-vlan-interfaces" set for a previous use of this module, but took that off with...

DHCP Server on 6509

10-11-2010
I have a 6509 with many VLANs and a seperate DHCP server to provide addresses.  I need to create an additional VLAN (VLAN 20) and I would like to use the 6509 as the DHCP Server for the new VLAN. I know to set up:ip dhcp excluded-address 20.20.20.1 2...

FWSM in transparent mode

06-08-2010
Attempting to set up the FWSM in transparent mode (single context).  Here is my scenario:  I have a 6509 with 3 VLANs…40 (DMZ), 41 (Staff), and 42 (Inside).  I would like to use the FWSM to control access transparently between the 3 VLANs. Here is wh...
Community Statistics
Member Since ‎06-08-2010 05:48 AM
Date Last Visited ‎04-11-2022 09:41 AM
Posts 9