Good day everyone, I have just set up a SIP trunk with an ISP and I'm getting errors when I make outbound and inbound calls. For outbound calls, I get the 480 - Temporarily Unavailable message and I see a CANCEL somewhere in the debugs. For inbound calls, I see a 'Not acceptable Media' message even though i have all the codecs configured under the dial peer. My ITSP is also saying they have all the codec options available. I kindly seek help from the community. See confgs below: dial-peer voice 8 voip description *** Inbound Call from SIP Server*** session protocol sipv2 session target ipv4:126.96.36.199 incoming called-number . voice-class codec 50 no voice-class sip early-offer forced dtmf-relay rtp-nte sip-kpml no vad dial-peer voice 9 voip description ***Outgoing Call from SIP SERVER**** destination-pattern .T session protocol sipv2 session target ipv4:188.8.131.52 session transport udp voice-class sip early-offer forced voice-class sip bind control source-interface Vlan100 voice-class sip bind media source-interface Vlan100 dtmf-relay rtp-nte sip-kpml codec g711ulaw no vad voice class codec 50 codec preference 1 g711ulaw codec preference 2 g711alaw codec preference 3 g729r8 codec preference 4 g729br8 codec preference 5 g728 Calls are generally from 9087003801 to 07065989048/09087368158 and vice versa Please find trace attached.
... View more
Hi guys, I'm trying to configure WCCP on a Nexus 7000 device for an ECDS implementation and I can't seem to get it working. I've made reference to the documentation ( http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/unicast/configuration/guide/l3_cli_nxos/wccp.html ), but i feel like I only figured out half of the puzzle. This is what I have so far. N7k-01# sh run wccp !Command: show running-config wccp !Time: Wed Jul 15 12:45:32 2015 version 5.2(9) feature wccp ip wccp 90 redirect-list ECDS interface Vlan200 ************Gateway for DMPs and DMM ip wccp 90 redirect in N7k-01# sh ip access-lists ECDS IP access list ECDS 10 permit udp any 10.53.79.243/27 ***********Content acquirer 20 permit udp any 10.53.79.249/27 ***********Streamer 30 permit udp any 10.53.79.251/27 ***********ECDS Manager N7k-01# I need your help guys...what am I doing wrong?
... View more