We are currently testing this in the lab:Two C3745's with a PC connected to each and a 100MB switch in the middle. This is to simulate the eventual Internet VPN solution that it will become a part of. Both C3745's have AIM-VPN/HPII modules (hardware ...
Hi, I was wondering if anyone might be able to give an opinion on Wanspy (www.dvsinfo.com). Has anyone here used it or would any of you recommend it? If not, what other router monitoring tools might you all recommend in addition to MRTG. Thanks!
Here goes: We just removed a site from our frame relay network and on the router on our end I can see that the DLCI pvc status is now INACTIVE. I want to make the status = DELETED. Can anyone tell me if I can do that from the router interface or does...
I would like to hear what is the best solution for consoling to a router/switch via a notebook with no serial port. I know there are USB to DB9 adapters (see link below) but I have heard that there are issues with sending the BREAK signal with these....
Just wanted to update for any others who may come across a similar issue, we have resolved the issue and found the answer.Once the command "ip cef" was enabled in the config we began seeing throughput of around ~70Mbps. Things are good.By default "ip...
Thanks for the response, much appreciated!Went through all of the above and they all checked out but still have the same results.If anyone can offer some further pointers/advice I'm all ears. Thx.
