About Baptiste

Baptiste · 06-13-2023

Hello,Do you have a documentation to reset the cisco without the password?I do like this:I go into the rommon and I type confreg 0x2102 and then I type the reset command.Is this correct?

Baptiste · 05-11-2023

Hello,I want to make a BGP infra with RPKI here is the infra.The router C1_B can ping the 213.111.0.2 but not the 192.168.2.1.Here is the bgp conf of router c1_B : router bgp 40001 bgp log-neighbor-changes bgp rpki server tcp 192.168.102.39 port 3323...

Baptiste · 05-11-2023

Bonjour, Je souhaite faire une infra BGP avec RPKI voici l'infra.Le routeur C1_B arrive a pinger le 213.111.0.2 mais pas la 192.168.2.1. Voici la conf bgp du routeur c1_B ! router bgp 40001 bgp log-neighbor-changes bgp rpki server tcp 192.168.102.39...

Baptiste · 05-11-2023

Hello, I have set up BGP with two AS, see image below.I have also set up the locals preferences but I don't know why but they are not all displayed. sh bgp BGP table version is 14, local router ID is 192.168.102.118 Status codes: s suppressed, d damp...

Baptiste · 05-04-2023

Hello,I have a Cisco ASR901 router and I want to put an ip address on an interface but the router tells me that it does not support the command.Here is what I did:***C1_B(config)#int gi0/0C1_B(config-if)#ip addC1_B(config-if)#ip address 192.168.1.2 2...

Baptiste · 05-12-2023

Voici la configuration qui marche :router bgp 40001 bgp log-neighbor-changes bgp rpki server tcp 192.168.102.39 port 3323 refresh 600 neighbor 192.168.1.1 remote-as 40001 neighbor 192.168.102.39 remote-as 40001 neighbor 213.111.0.2 remote-as 400...

Baptiste · 05-12-2023

When we do a sh ip route on the routeut C1_B we can see that it can't learn the network 192.168.2.0.ip roCodes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGPD - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter areaN1 - OSPF ...

Baptiste · 05-12-2023

@MHM Cisco World Hello,I want to make a BGP infra with RPKI.I would like to make these two AS communicate but the router C1_B does not manage to know the network 192.168.2.0/24 and conversely with the router C2_B.Router C1_B pings 213.111.0.2 but not...

Baptiste · 05-12-2023

M02@rt37 C2_B : C2_B(config)#do sh ip bgp neighbors BGP neighbor is 192.168.2.2, remote AS 40002, internal link BGP version 4, remote router ID 200.0.1.1 BGP state = Established, up for 00:01:24 Last read 00:00:26, last write 00:00:14, hold time ...

Baptiste · 05-12-2023

M02@rt37 C1_B :BGP neighbor is 192.168.1.1, remote AS 40001, internal link BGP version 4, remote router ID 100.0.4.1 BGP state = Established, up for 00:04:03 Last read 00:00:16, last write 00:00:21, hold time is 180, keepalive interval is 60 seco...

Member Since	‎02-14-2023 06:44 AM
Date Last Visited	‎07-12-2023 12:48 AM
Posts	53
Total Helpful Votes Received	6

User Statistics

User Activity

reset cisco therm-7606S

BGP relationship does not work

Relation BGPne marche pas

Local preference not displayed

How to assign an IP address to a cisco asr901 interface?

Re: Relation BGPne marche pas

Re: Relation BGPne marche pas

Re: Relation BGPne marche pas

Re: Relation BGPne marche pas

Re: Relation BGPne marche pas