I think we getting to the point where we started, ASA is not letting me mark the traffic, or may be ...

Sorry about that, my objective here is to achieve end to end QoS, to get that packet to be prioritiz...

Thanks everyone for the replies, As i mentioned in my initial post, i dont get the option of marking...

I have a WAN(SHDSL) link between 2 sites, serivce provider has MPLS core network. Site 1 -- Cisco 87...

I have a WAN(SHDSL) link between 2 sites, serivce provider has MPLS core network.Site 1 -- Cisco 878...

Is it possible for Cisco VPN Client (any version) to Reconnet/Redial the vpn connection?

When you go to stats and click on route details, can you see ur internal network in secured routes?

Is the NAS connected to the same subnet as the windows server? what protocol VPN clients using when ...

I can not access your config for some reason, can you post it here? check few things, have you enabl...

Yes it is connected to DSL MODEM which is in half bridge Mode also Ethernet interface is configured ...

Those 3 values are "Configured Rate, Normal Burst and Externded Burst".This is how cisco recommend t...

As i indicated earlier, If you look at the config you have sent, it has a statementNO IP ROUTINGwhic...

The reason isNO IP ROUTINGalso there are no NAT statements present for 192.168.1.0/24 Network.Muhamm...

When i configure one of ethernet interfaces on ASA 5510 as DHCP client it obtaines the lease from DH...