About Markus Benz

Markus Benz · 10-09-2015

Hi,it should be a Multi Mode (MM) cable OM3 or OM4 with LC connectors on both sides.Regards,Markus

Markus Benz · 10-08-2015

In MPLS VPN networks, the OSPF process ID should match. Otherwise, external Type 5 routes are generated.There is also a good article on the net:http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/L3VPNCon.html#wp320797Check the "Usi...

Markus Benz · 10-08-2015

Hi,I try to answer your question:1. yes this is possible. If you run CE based OSPF over an MPLS core you may use Super-Backbone. With this you stretch your Area 0 across the core.2. No, the redistributed routes should not be redistributed again. They...

Markus Benz · 09-30-2015

Hi Ricky,Cisco sends the ifIndex within the SNMP Trap.You need to resolve that to the interface name. Once you have the name you can create an alert if the Interface name includes the string "Tunnel" for example.Alternatively you can do the same with...

Markus Benz · 09-13-2015

I think theses are both valid designs. There is no right or wrong. And I probably would need much more insight into the situation and requirements of that company.But I would normally go with the P - PE design with no CE routers. It has one tier less...

Member Since	‎05-18-2015 01:57 AM
Date Last Visited	‎08-01-2018 02:27 AM
Posts	76
Total Helpful Votes Received	70

User Statistics

User Activity

Hi,it should be a Mulit Mode

In MPLS VPN networks, the

Hi,I try to answer your

Hi Ricky,Cisco sends the

I think theses are both valid