Hello, I am currently having a problem with the Jabber client on a Sony Xperia z3.I have tried installing and configuring it on IPhone devices and on a Nexus 5 and it worked perfectly,but when I tried on the Xperia it didn't work.I could login,b...
Due to the fact that you have the connection setup so that you can reach active from active and standby from standby once a hsrp change occurs only on one side you won't be able to reach the other one due to the fact that you don't have a route from ...
Hello,
Do you have any access lists in place ? The rest of the IP's could be blocked except the .1 because I assume the .1 is the address of the vlan management interface. Also just to be sure,the switch is L3 capable ?
Hello,
It's just a subinterface. You can create a virtual interface from an physical one. The command is as simple as typing in global config : interface fa 0/nn.nn
Hi, Just a hunch but doesn't the ip helper have to have the pool defined. I mean you have a DHCP pool defined locally but you set it to get it from an external DHCP server that doesn't even have the correct pool defined. Try to define the pool in...