About SMRHosting

SMRHosting · 04-27-2012

We have a our users on a 40mb X 5mb connection. I noticed when installing an application from the internet this router installs at like 650kb our old router would install the same application at aroun 1.2mb I did some tests switching them out on the ...

SMRHosting · 04-20-2012

I have a 1921 k9 router that has several DHCP pools configured. Before implementing the firewall they were all working. After implementing it they stopped working. I messed around and got the routed port GE0/1 handing out IP addresses and left it alo...

SMRHosting · 04-19-2012

I have a 1921 K9 with a 4 port 10/100/1000 EHWIC switch. Interface 0/1 = 192.168.1.0EHWIC = 192.168.5.0 I have Active Directory setup on the 192.168.1.0 network. When I attempt to join the domain from 192.168.5.0 it joins but I get errors. After some...

SMRHosting · 04-03-2012

The Cisco 1921 router has two routed adapters. One is GE0/0 which I am using for my WAN interface. It is working properly. The 2nd interface is GE0/1 which is being used as my internal adapter. It is running NAT. When I attempt to reach the internet ...

SMRHosting · 04-28-2012

Sorry I thought I had that in the title. The new router is a Cisco 1921 K9. I did configure it myself.

SMRHosting · 04-24-2012

Alright I have a cross over cable I will use it next time. What exactly do you mean your second post? Are you talking about this lineno ip dhcp excluded-address 192.168.1.10 192.168.1.254I went ahead and restored to an earlier version of the config. ...

SMRHosting · 04-23-2012

I sent you a PM. I loaded the config but it has made the router unuseable. None of the interfaces work either via DHCP or static IP address and I am unable to connect to the router via SSH from 192.168.1.0 (GE0/1) I am in the process of reloading the...

SMRHosting · 04-21-2012

I dont mind changing the config. This is my 1st time setting up a cisco router. The reason I used the vlan-interfaces is because that was the first way I figured out how to get VLANs running on the router.

SMRHosting · 04-19-2012

Will this allow all UDP communication or only communication on the UDP ports defined in the policy map?I added this to the running config and tested the ports still return the filtered value. I already opened the ports in the windows firewall so I do...

Member Since	‎04-03-2012 08:01 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	9

User Statistics

User Activity

very slow when installing something from the internet

firewall blocking DHCP on cisco 1921 k9

Firewall on 1921 K9 blocking UDP traffic it should be allowing

Cisco 1921 LAN adapter unable to reach the outside

very slow when installing something from the internet

Re: firewall blocking DHCP on cisco 1921 k9

Re: firewall blocking DHCP on cisco 1921 k9

firewall blocking DHCP on cisco 1921 k9

Re: Firewall on 1921 K9 blocking UDP traffic it should be allowi