About Villy Feltmann

Villy Feltmann · 05-22-2015

MY setup is as follow: 1 RV130 router, 1 unmanaged POE switch connected to port 1 on the RV130, 2 WAP321 accesspoints connected to 2 ports on the unmanaged switch.My goal is to have a work network and a guest network both with access to the internet ...

Villy Feltmann · 01-18-2015

Hi,I'm trying to setup 4 Vlans in an office with 2 WAP121 and a RV110W, in between is a D-link DES-1210-28P POE switch. I have one patch-cable from the d-link to the router. how do I setup the router so all the VLANs go though port one on the router?...

Villy Feltmann · 02-25-2012

Undocumented condition: the password need to be made of 3 out of 4 groups: upper case, lower case, digits or signs. and have to be at least 8 letters/signs, ie. P@sswier4As my ISP messed with the wan I have to made a dynamic DNS domain.no-ip.com acco...

Villy Feltmann · 05-22-2015

ah I thought an unmanaged switch just let all pass whatever VLAN it belongs to. I have added a linksys' LGS308P and added VLAN 3 to it and ticed the guest VLAN choice and now everything work. thanks Devils_advocate.

Villy Feltmann · 02-10-2015

Thanks Michael,I'll do that.best regardsvilly

Villy Feltmann · 02-10-2015

I did try out the Vlans on the RV110w but as soon as I set the Vlan to 10 on wap121 or set the Pvid on the switch to 10 then I loose connection. I have some screendumps of the settings. If I have to make a support case where do I do that?

Villy Feltmann · 02-03-2015

I'll go there and try it tomorrow. At the moment the printer is is on vlan1 192.168.0.0 with it's ip 192.168.0.251/24 and the gateway set to 192.168.0.1 so I'll set vlan 10 to 192.168.10.0/24 gateway 192.168.0.1 and check if it works. I'll return lat...

Villy Feltmann · 02-02-2015

there are no Policies set in the network or the RV110W.Put it in it's own VLAN sound as a good idea. I have no idea how to route from one VLAN to another VLAN, and tick the Inter-VLAN routing box gives access to all VLANs from all VLANs? I suppose th...

Member Since	‎02-21-2012 08:48 AM
Date Last Visited	‎02-03-2019 01:52 AM
Posts	14

User Statistics

User Activity

Only VLAN 1 get access to the WAN on RV130

Vlan two WAP121, a layer 2 switch and RV110w

Quickvpn login error solved

ah I thought an unmanaged

Thanks Michael,I'll do that

I did try out the Vlans on

I'll go there and try it

there are no Policies set in