About noelciscoman

noelciscoman · 06-13-2023

I have a Cisco 2602i that will not join a Cisco 5508 WLC.When I watch the AP start up from console I see these messages:*Jun 13 16:55:09.999: %CAPWAP-3-ERRORLOG: Go join a capwap controller*Jun 13 16:54:05.000: %CAPWAP-5-DTLSREQSEND: DTLS connection ...

noelciscoman · 05-12-2023

Can I use a GLC-SX-MMD in a slot on a C3850-NM-4-10G?I currently use the GLC-SX-MMD SFP module in a 2960x. However, I recently was able to free up a couple of ports in the 3850 and I would like to move that SFP to the 3850 to provide the uplink inst...

noelciscoman · 03-16-2023

I have two UCS C200 M2 servers that were used in our CUCM environment. I understand these are older, unsupported platforms, however, I have a non-production need for a couple of 1U servers to play with, and these would fit the bill. However, when s...

noelciscoman · 02-24-2016

I have been struggling allowing specific youtube videos. Are default filter blocks streaming media, and as a result when a user goes to youtube, they are blocked. Occasionally, I have been asked to allow specific videos, and as such I have added th...

noelciscoman · 07-05-2023

Nothing to do with setting the time resolved the issue of the 2602 not being able to join. However, converting the AP to autonomous from light weight, and then back again to light weight did resolve the issue, and it joined the controller without a ...

noelciscoman · 07-05-2023

I am seeing the same while needing to regen certs in Unity, Call Manager, and IMP. The Call Manager certs in Unity have the same date on everything that I found in Unity and Call Manager that need to be regenerated. One of the CallManager certs in ...

noelciscoman · 06-13-2023

I should mention that this is the only AP that is not joining the controller. We have a mic of 1140s, 2600s, and 2700s, and all are joined but this problem 2602i.Software version on the controller is 8.3.150.0

noelciscoman · 05-18-2023

The module works. I have other links active on it. NAME: "Switch 2 FRU Uplink Module 1", DESCR: "4x10G Uplink Module"PID: C3850-NM-4-10G , VID: V01 , SN: FOC17343BS6NAME: "Te2/1/1", DESCR: "SFP-10GBase-SR"PID: SFP-10G-SR , VID: V03 , SN: AVA1731A8KA...

noelciscoman · 05-12-2023

Thanks. I will try again. I was watching from terminal and when I removed the 10G module that is not being used, I saw the log reflect the 10G SFP+ was removed. However, when I insert the 1G module in the same slot, there is nothing in the log. T...

Member Since	‎02-20-2006 12:11 PM
Date Last Visited	‎07-12-2023 12:04 AM
Posts	15

User Statistics

User Activity

Ciscp AP 2602 does not join wireless controller

SFP compatibility Cisco 3850 10G slot

Upgrading CIMC on UCS C200 M2

How do you allow specific youtube content?

Re: Ciscp AP 2602 does not join wireless controller

Re: "CallManager-trust" certificates in Unity Connection 11.

Re: Ciscp AP 2602 does not join wireless controller

Re: SFP compatibility Cisco 3850 10G slot

Re: SFP compatibility Cisco 3850 10G slot