Hi All,I have a network with multiple VLANs, all being firewalled on an ASA 5520. I want to be able to share drives and printers between subnets, yet even when I place a permit ip any any rule in both firewall policies, it doesnt work. It works fine ...

Hi All,I have a Cisco3560G switch that has a route map places on one of the SVI interfaces. I am trying to tftp from the switch to the NMS (which is on the same VLAN) yet when the route map is in place, it fails (although the NMS see's the traffic, i...

Hi All,I have my AIP-SSM set up working with my 5520 ASA, and the device is passing packets, but how do I actually confirm it is doing what it is supposed to? I can see that it is processing packets, but I can see no way of verifying what it is doing...

Hi All,I cannot seem to ping from the outside of my 5520 firewall to an inside network. I have a single physical outside interface connected to a Layer 2 switch, with a laptop connected to it. This is on network 10.11.131.0/28. From there, I cannot p...

Hi Everyone,Im a NAT newbie so any help would be greatly appreciated, but Im looking to NAT an internal address to the outside world. So, I have a remote host that I wish to connect to an internal host, but on a pseudo address. So I need the firewall...