About hauchinango

hauchinango · 10-15-2024

I am having a SIP issue on UCM with call forwarding and caller ID. If I enable privacy header under voice service voip/sip, I no longer receive caller ID on incoming calls.However, if I remove this command caller ID will work but DN call forwarding f...

hauchinango · 05-11-2023

I have restored from an older back and it will remain stable for a day or two but then crash again. My server team cannot find anything on the host or vm to pinpoint the cause of the crash. I am in the process of getting a recent backup via sftp whi...

hauchinango · 07-01-2022

I did not setup single sign on for WebEx, this was done by someone who is no longer with our company.I see in the admin portal that my Cisco (SP) cert is expiring soon, but the cert usage shows "none". We use Azure IdP which is valid for another few ...

hauchinango · 02-12-2021

Running an 11.5 HA pair of UC. Primary server is at our datacenter. Secondary is at our HQ. When the primary box answers calls, the voice quality is very garbled. When I stop taking calls and force calls to be answered by the secondary box, the ca...

hauchinango · 03-09-2020

I have a couple dozen stand alone conference units (SX10/20, RoomKit etc). Currently, I have an HTML file that I import as the Favorites for the contact list. As we keep adding units, it is getting time consuming to update all the Favorites each ti...

hauchinango · 10-15-2024

Here is my SIP settings under voice service voip. Do you recommend removing asserted-ID PAI? sipsession transport tcprel1xx disableheader-passingerror-passthruregistrar server expires max 1200 min 60asserted-id paiprivacy headerearly-offer forcedmid...

hauchinango · 02-19-2021

Sorry for the late reply. Weather issues here so no power over the last week. No issues to the PSTN. I have a phone at the DC and no voice quality issues between DC phone and HQ phone, although I do not have a phone on the server VLAN so slight dif...

hauchinango · 04-03-2020

After much head banging and web sluething, I Was able to get this working finally by changing a setting in the SIP profile for the trunk. I set the "SIP Rel1xx Options" to "Send PRACK if 1xx Contains SDP"

hauchinango · 03-31-2020

Yes,we are sending full +e164

hauchinango · 03-12-2020

I know this is an old thread but I had the same issue and was able to resolve by going to the web interface of the ATA, Line 2 and select enable. It was set to "no" for the line enable option.

Member Since	‎04-19-2005 12:26 PM
Date Last Visited	‎11-22-2024 09:34 AM
Posts	292
Total Helpful Votes Received	19

User Statistics

User Activity

UCM with SIP Trunk: Privacy Header breaks caller ID.

CSPC Server Crashing

Cisco (SP) Cert Expiring, "None" for Usage

Unity Connection Greeting Poor Audio Quality

Telepresence Endpoints Phonebook without TMS?

Re: UCM with SIP Trunk: Privacy Header breaks caller ID.

Re: Unity Connection Greeting Poor Audio Quality

Re: Porting to SIP Trunk Broke Lync Conference

Re: Porting to SIP Trunk Broke Lync Conference

Re: CISCO ATA 190 Line 2