About Sakher Al-Bawab

Sakher Al-Bawab · 11-22-2013

I want to upload over 350 route patterns using BAT Tool in CUCM 9.1. All patterns must have their Called Party Prefix Digits (Outgoing Calls) Field containing 10 numbers with the number "0" at the begining. The Problem is the CSV file removes the lea...

Sakher Al-Bawab · 04-15-2011

I have IP Phones with model 7945G and Cisco Unified Communications Manager versoin 7.1. Is there any way to lock every phone with a password dedicated to the owner of the phone so that no one not authorized to use the phone can make an outgoing calls...

Sakher Al-Bawab · 04-10-2011

I have a router with IOS version 12.4 (22). why the telnet is still listening at the router even I disable it in the "Line" configuration:line vty 0 1access-class 23 inexec-timeout 15 0password ciscologging synchronoustransport input sshline vty 2 4a...

Sakher Al-Bawab · 11-23-2013

YES! it worked after adjusting it then uploading it directly without opening it again ... Thank you very much Chris

Sakher Al-Bawab · 11-23-2013

I've tried that, but when saving and closing the file then open it again, the type of the cell is returned back to General and the "0" is stripped out again.You can try that on the attached file and see this behavior.Sent from Cisco Technical Support...

Member Since	‎01-30-2011 06:18 AM
Date Last Visited	‎02-26-2021 03:22 AM
Posts	5

User Statistics

User Activity

Route Pattern CSV File Removes "0" from Called Party Prefix Digits Field

Lock IP Phone with a Password

Prevent Router from "LISTEN" to Telnet Port

Re: Route Pattern CSV File Removes "0" from Called Party Prefix

Re: Route Pattern CSV File Removes "0" from Called Party Prefix