I have UC560 with E1,if im try to make a call for default it try FXO trunks. I want to use My E1dial-peer voice 63 pots trunkgroup ALL_FXO corlist outgoing call-national-plus description **CCA*Mexico*Long Distance Mobile** translation-profile outgoin...
Hello,i have an issue with SPA501g and SPA303, if i receive a externall call y cant transfer the call , i dont have the transfe button on the phone but is configured in the phone template, what can be the problem?
Hello,if i receive or make a external call i cannot transfer the call to any ip phone im using uc540 en 12 phones and no one works, i create new template and using the existing default templates and the transfer button does not appear in the ip phone...
Dones any sw of Cisco L3 support NAT and OSPF?If the answer is yes can someone tell me a switches model pleaseThanksSent from Cisco Technical Support iPad App
I will try tomorrow in the morning in the office. I have one question where did you tell to use the E1 port, as i see here you create a trunk group for ALL_T1E1 but this name is customized right?i does not mean the UC will know wich port is for outgo...
I did the configurarion in the CLI, becasu for Mexico i dont hace the options in the CCA for R2 Modified, i used this configuration for the E1 port:controller E1 0/3/0 framing NO-CRC4 line-termination 75-ohm ds0-group 1 timeslots 1-15,17-31 type r2-...
