About CCMADM1N1_2

CCMADM1N1_2 · 08-02-2012

Hi all,Can someone please post a typical or suggested current/known working configuration of an E1 "PRI" with R2 signaling for incoming voice (DID) + outbound PSTNI have 10 channels available from the Provider (TELMEX) in Mexico so not sure if and wh...

CCMADM1N1_2 · 06-21-2011

Hello,Client has a Nortel IP/Hybrid system in Europe (Succession ? Signaling Server)Cisco UC560 in the US Permanent Site to Site VPN tunnel (Cisco 3xxx router > UC560) between both sitesSIP trunk for voice calls between the 2 sites/systemsNortel PC c...

CCMADM1N1_2 · 07-13-2017

hi jonathan just checking in, been over a year - any resolution on this bug? No case was opened, as I cant imagine nobody else, including cisco, did not try to use an SSID with a space besides me? I can open one, but seems silly at this point. I put...

CCMADM1N1_2 · 09-17-2016

Just checking in, been 3 months, hoping there is or plans for a patched firmware for this? Thanks

CCMADM1N1_2 · 06-18-2016

Both of these versions have the bug: (active and backup/alternate) see pic 1 pic 2 shows same ssid works fine on WAP371

CCMADM1N1_2 · 06-18-2016

Yes same issue here. Actually the issue / bug is there on the latest 2 versions of code. I just updated to the newest version and its still happening. Works fine in my WAP 371's but they use different code so its def an issue with WAP 351 code Heres...

CCMADM1N1_2 · 01-26-2016

Same here, 9971 is fine, 8945 is not...I have 2N Force and Verso both setup and working with 9971 / CME are you running the 8945 with sccp or SIP firmware? Is your IP PBX is CUCM or CME ? I'm using CME and so far tried SCCP firmware on the 8945. My i...

Member Since	‎10-08-2009 09:52 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	21

User Statistics

User Activity

E1 PRI - R2 config help needed!

Toll Bypass call - TDM> IP/SIP trunk >PSTN - No Audio

hi jonathan

Just checking in, been 3

Both of these versions have

Yes same issue here. Actually

Same here, 9971 is fine, 8945