drumrb0y
Level 1
Level 1
Member since ‎08-14-2003
‎08-18-2017

User Statistics

  • 184 Posts
  • 1 Solutions
  • 36 Helpful votes Given
  • 15 Helpful votes Received
Recent Badges
1 Accepted Solution
1 Helpful Vote
10 Helpful Vote
50 Replies
20 Replies
10 Replies
5 Replies

User Activity

I just completed setting up a AIR-CT2504-K9 controller with 9 APs with RADIUS on the private WLAN and an open guest WLAN; I want to enable netflow exports to a collector, but see no place in the GUI to do this and no obvious CLI commands.Could someon...
I have AnyConnect newly configured on my ASA 5550, running 8.2.x code; however, Mac users cannot connect using the Apple client, nor using the Cisco AnyConnect client - they are getting a "posture error" of some kind or the laptop is failing some kin...
I've got an ASA 5550 running Software Version: 8.2(2); I replaced two static NAT commands below with new commands to change the connection limits: no static (inside,outside) ggg.ggg.ggg.118 ppp.ppp.ppp.118 netmask 255.255.255.255 tcp 500 1000 stati...
I have an ASA 5510 with sub-interfaces configured for multiple VLANs traversing a trunk on Interface 0/2; these interfaces are all DMZs - they all must reach a fellow DMZ VLAN that contains a domain controller:interface Ethernet0/2.184 description VL...
I haven't added to my entwork in a while, so I might be a bit rusty on LAN connectivity troubleshooting.I have an ASA55xx that will be the L3 core of a new network infrastructure; the VLANs defined on the edge switches will trunk to a DMZ interface o...
Community Statistics
Member Since ‎08-14-2003 12:18 PM
Date Last Visited ‎08-18-2017 03:54 AM
Posts 184
Total Helpful Votes Received 15
Helpful Votes From
Helpful Votes Given To