I have this number 4555,,,6668888 configured as a speed dial on an extension line "2008" in CUCM 11.x.I want the speed dial number "4555,,,6668888" to be auto dialed without any manual intervention whenever someone calls 2008.How can I achieve this?
I have a SIP trunk from a third-party PBX to CUCM which has one way audio.When SIP/SDP invite is sent to CUCM IP, we see a rogue RTP stream coming from IP phone directly to third-party PBX in Wireshark capture. This is even before we received 200 SDP...
Hey All,Can you please explain which logs we can look at to troubleshoot/verify that translation pattern is working fine? My question is specifically related towards use of RTMT tool to find the logs showing the translated patterns successfully. OR i...
Hi @Maren Mahoney Thank you for the reply.Yes. The target needs to receive both the 4555 AND the 6668888 with the pause in between. The pause required is 6 seconds. The Target is a 3rd party system which has a SIP trunk with CUCM. The expected call f...
Hi @Roger Kallberg and @Jonathan Schulenberg ,Thank you for the reply. As far as I'm aware, Route/Translation Patterns do not support sending DTMF automatically with pauses or has it changed?Call forwarding doesn't accept ,,, in call forwarding numbe...
Hi @Ayodeji Okanlawon,How to enable this configuration on CUCM?In short, what I want is for CUCM to not send any new connection information (e.g IP phone information in c=) to a third-party PBX.Instead, when a SIP invite is sent from third party PBX ...
