About slytell

slytell · 11-21-2003

In an attempt to configure an ACL on a 2600 series router running 12.0 IOS, I configured the following ACL:access-list 101 permit ip any 10.101.67.0 0.0.0.63access-list 102 permit ip any 10.101.67.192 0.0.0.255I'm using a subnet mask of 255.255.255.1...

slytell · 08-22-2003

I have a 1600 series router that will not boot to any prompt due to a corrupted file on the flash. Is there any way to erase the flash without getting to a prompt?Thank you in advance for all replies!Steve

slytell · 07-02-2003

All responses are welcomed!I have a Cat 2924 with a basic configuration running Version 12.0(5.1)XP. I am trying to limit access to our payroll server. Only the default VLAN is configured. After applying the following ACL, PCs other than the ones ...

slytell · 06-26-2003

I have a 3640 with a 4-port IMA module and 3-T1s in a single group. I know there is a max VC limit of 255 and a max of 4 groups per module. Is it possible to configure 2 groups, each with 2-T1s? Will this give me a max of 255 VCs per group or is t...

slytell · 04-23-2003

My snmp server is displaying all messages corrupted (not readable). This is from all routers sending messages back to the server. Viewing the message with a sniffer, they appear to be corrupted before getting to the server. Any ideas on why this i...

slytell · 11-21-2003

Thank you for your response! I had the right idea but used the wrong numbers.Have a great day and smile! :-))Steve

slytell · 08-22-2003

I thought that was the case but was hoping otherwise.Thank you for your response and have a great weekend!Steve

slytell · 07-02-2003

Thank you for your quick response! I guess that's why it didn't work...but does not explain my missing hair. :-)Steve

slytell · 04-16-2003

I do know to put the T1 CSU into a hardwired loop, you would short pins 1 - 4, 2-5. Therefore, I would try pining the RJ45 cables the same way. As far as getting the two CSUs to communictate back-to-back, I believe you have to set the encapulation ...

slytell · 03-21-2003

Thanks for the quick response and the information!Steve

Member Since	‎03-14-2003 07:36 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	15

User Statistics

User Activity

ACL Configuration Question

Corrupted IOS image on flash

ACL on Cat 2924

IMA limits on a 3640?

SNMP messages are corrupted.

Re: ACL Configuration Question

Re: Corrupted IOS image on flash

Re: ACL on Cat 2924

Re: Back to Back T1 CSU/DSU for testing

Re: How to clear the counters for Public buffer pools?