About bhartsel

bhartsel · 04-07-2003

I have a hospital network with a DSL connection that we use for Internet Access by setting the gateways on each client to point to the DSL router (Internal Interface) and proper DNS settings. This is all in a 128.1.x.x network. A remote office comes ...

bhartsel · 03-27-2003

Given this configuration on my 1600 router that handles a partial frame relay connection, how can I secure the connection to only allow SMTP email to come in and out. I do not use the connection for anything else.Current configuration:!version 11.2no...

bhartsel · 03-14-2003

I purchased a used 3500 switch that has been heavily configured. I need a basic switch with no VLANS or special configuration. Which command works best? I remember using a write-erase and losing the image file and everything. I want to erase the pres...

bhartsel · 04-08-2003

Do I still need NAT if I have an Ethernet interface on the 3600 (e0/0) that is addressed 128.1.10.250 and the DSL router (non-cisco) is 128.1.9.246, all with default /16 masks?It seems as though the packets are already exiting e0/0 as 128.1.x.x and j...

bhartsel · 03-27-2003

That worked and saved lots of reading. One more problem: I found that I have to let an application that runs on port 9006 in. It's a remote access application something like PC anywhere called NetAccess. How would I allow that port on incoming and ou...

Member Since	‎03-14-2003 08:38 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	5

User Statistics

User Activity

3600 Frame Relay to Internet Access problem

1600 Series Security Problem Help!!!

Catalyst 3500 erase

Re: 3600 Frame Relay to Internet Access problem

Re: 1600 Series Security Problem Help!!!