About Yuvi1983

Yuvi1983 · 09-16-2024

Hi Community.I need some help on the Cisco ASA please, On Cisco ASA firewall having default route pointing to internet ( ISP1)on outside interface S* 0.0.0.0 0.0.0.0 [1/0] via 10.209.66.71, outsideAll working as expected Next, Scenerio1: I have anoth...

Yuvi1983 · 09-03-2024

Hi Community, I am having the following situation now,R1 -asr1001 having static default route to firewall 0.0.0.0/0---> 192.168.0.17On R1 I configured following & I like to prefer the BGP path over above default route path. #R1 Configinterface...

Yuvi1983 · 08-23-2024

Hi Community, Hi Community,I have following situation on ASR1001I created following BGP configuration and Neighbour is Checkpoint firewall.ip vrf 250interface Port-channel1.250encapsulation dot1Q 250ip vrf forwarding 250ip address 169.254.0.11 255.25...

Yuvi1983 · 08-22-2024

Hi Community , I am having asr1001 & added the following config for bgp ip vrf 250interface Port-channel1.250encapsulation dot1Q 250ip vrf forwarding 250ip address 169.254.0.11 255.255.255.248router bgp 65133bgp router-id 10.254.0.2bgp log-neighbor-c...

Yuvi1983 · 07-17-2024

Hi, I am looking basic Cisco routers with medium budget, the router required for Azure connectivity.Requirement: SFP/SFP+ Copper & FIBER ports (1G/10G) BGP /IP Routing / redistribution / route-map/IP prefixes filtering This router will have 1G link f...

Yuvi1983 · 09-09-2024

Hi , I am facing the issue between Global vrf & vrf 250 Here is my config ip prefix-list VRF-250 seq 10 permit 10.50.120.0/24 ( In VRF 250 )ip prefix-list VRF-Global seq 10 permit 10.50.122.0/24 ( In Global )R2#sh route-map VRF-Global-to-VRF-250route...

Yuvi1983 · 09-05-2024

I am still doing config edit & testing . will come back ...Thank you so much

Yuvi1983 · 09-05-2024

Yesterday , I tried adding the vlan 500 interface with ( ip vrf forwording 250 ), Yesterday seen the hits on FWIf I am removing the ( ip vrf forwording 250 ) for vlan 500 The traffic hits not seen on the FW R2#sh ip int briefTe0/0/0.500 10.50.120.2 Y...

Yuvi1983 · 09-05-2024

ok, trying now

Yuvi1983 · 09-05-2024

R2#sh run | i 10.53ip route 10.53.0.0 255.255.0.0 TenGigabitEthernet0/0/0.184 192.168.0.60 50 !Added now ip route 10.53.120.0 255.255.255.0 TenGigabitEthernet0/0/0.251 R2#sh ip ro vrf 250 | i 10.53B 10.53.120.0/24 [20/0] via 169.254.0.9, 00:08:46B 10...

Member Since	‎07-12-2023 10:22 PM
Date Last Visited	‎09-17-2024 02:38 AM
Posts	35
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco ASA Default route preference

BGP path preference over Static default route

BGP advertisement with Neighbour as Palo Alto firewall

EBGP Advertisement between Cisco ASR to firewall

Cisco routers for DC to Azure connectivity using MPLS/EXPRESSROUTE

Re: BGP path preference over Static default route

Re: BGP path preference over Static default route

Re: BGP path preference over Static default route

Re: BGP path preference over Static default route

Re: BGP path preference over Static default route