Can anyone tell me if upgrading a Sup 2 from 128Mb memory to 256Mb is a complete 256Mb module or is there a slot to add an additional 128Mb card ? In either case are the MEM-MSFC2-256MB= and MEM-MSFC2-128MB= the modules to use.Thanks, St...
Thanks Tom,I also found that over the weekend after going through the release notes. I had provisioned for a 64Mb PCMCIA card but ROMMON needs to be at 7.1(1) for this so it's another thing to get sorted. Cheers, Stephen.
What confuses me here is that there is a Sup2 memory upgrade and an msfc2 upgrade both for 256Mb. When Software Center says a native IOS version for the Cat 6500 needs 256Mb memory which one is it referring to ?Thanks again, Stephen.
I believe the following happens. The ping leaves the first PC. It hits the router which routes it to the other interface and sends it out. The ping hits the 2nd switch but since the ping has no vlan info on it the switch assumes it is a VLAN 1 pac...
