About danny_248

danny_248 · 05-07-2017

Dear All I've been banging my head against a wall for some time trying to get this to work and it simply will not act in the way I expect it to. I would suspect this has something to do with the fact that my expectation in configuring the switch wou...

danny_248 · 05-08-2017

So essentially your first switch is fed the time via PFSense then you want that switch to send time via NTP to switch 2? Just so I am clear on how you want to achieve this setup.

danny_248 · 05-08-2017

My config was an example. Simply substitute the external NTP servers for an internal range. Although if your management VLAN can't access it you may have issues. We have an internal device at work serving NTP then that single device checks via web. N...

danny_248 · 05-08-2017

Hi Michael, These commands I have, this is working for me, providing all the routes are correct and things can talk to each other etc. clock timezone " " 0 minutes 0clock summer-time web recurring eu clock source sntpsntp unicast...

danny_248 · 05-08-2017

What sort of commands are you referring to? CLI. As long as the switch VLAN has a route to the NTP server, specifying that NTP server on SW2 will grab the time from your designated NTP server. Example To follow.

danny_248 · 05-08-2017

Hi Lee Thanks for getting back to me. I now have this working with some heavily restrictive rules. I had to go back to basics and separate out certain network devices and roles (away from my router). I did this just before looking at your reply whi...

Member Since	‎05-07-2017 05:42 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	8
Total Helpful Votes Received	5

User Statistics

User Activity

SG300 VLAN ACL's Just Wont Work

So essentially your first

My config was an example.

Hi Michael,

What sort of commands are you

Hi Lee