Here is the issue.Anyconnect connects and functions as intended for the split tunnel with a destination of 192.168.166.0/24  It does not work for 192.168.55.4 /30.  The configuration is the same for both.  I have static no nat statements and interest...

Has anybody created the High and Low level designs for the NASP? This is my first time and its always easier to have a template to work off of than to reinvent the wheel.  An incomplete example is displayed below but I was hoping someone had a comple...

I know that 4.2 is pretty old but it could be relevant in future versions with 5.3 and ISE.  I dont know.  Topic:  Implementing (permitting) subcommands under an Authorization Set.This was somehwat difficult for me to get working for the final step t...

I have been struggling with this for the past few days and have made very little headway.  I have both sides configured and they are identical in regards to the tunnel.  It appears that phase 1 is not completing.  I will submit the configs first and ...

DISCLAIMER**** (lol)OK so in our shop we dont do a lot of redesign so Im having a really hard time with this.  Its been a while.  Most of the changes we make are firewall changes and trunking.  Im having a huge brainfart on thsi.To the point:  I am t...