Hi,I have this issue on my 3750 stack which comprises of two 3750.-------------------------------------------------------------------------------------------------show switch stack-portsSwitch # Port 1 Port 2 -------- ------ --...
Hi,I have a 3750 stack and want to confirm if I can run HSRP on the stack to two different ASR routers for redundancy purposes ?It looks like the below :- -------------------------------- | SW1 SW2 | | 3750 Stack | ...
Hi,I need to upgrade an FWSM module from version 4.0(10) to 4.1(10) and also upgrade the ASDM from version 6.1(5) F to version 6.2 (2)F.This is the document that I have found :-http://www.cisco.com/en/US/docs/security/fwsm/fwsm41/release/notes/fwsmr...
Hi,I am trying to configure the dashboards for the pre-defined roles ie) Network Operator, Network Administrator, Helpdesk, etc but I cannot find the document to do this. I am running LMS version 4.1. The goal is to create users and put them in one o...
Hi,My question is that if I am using an SNMP read-write community string on the device, would Prime LMS still requirethe logging credentials of the device via ie) telnet/ssh ? The reason how I undertand this as long as the SNMP manager (Prime LMS) an...
Hi John,These are new 3750-X switches. The weird thing is that I am getting the same issue on two different stacks (both stacks are new ) whereby they both are stacked with two switches.The weird path is that both the stacks have the same ports that ...
Hi Vinod,Thank you for the response. If I just want to push configuration to the device ie) creating a vlan on a switch via the snmp read-write string, does the telnet/ssh credential is still needed in this instance ? If looks like yes based on the t...
On the same note, I believe instead of having the ACL on the inbound interface only , it should also be applied to the outbound interface to prevent unnecessary traffic flowing in the backplane.p access-list extended 90 remark Deny OLD Data Subs ...
Hi Alain,Thanks. Since I need to enter this ACL on all floors, I guess using a standard ACL would be a better option as I then can apply this ACL on all floors.So I would be better off using a standard ACL.ip access-list extended 90 remark Deny OL...
