About Sandeep Gupta

Sandeep Gupta · 06-24-2015

Dear Experts, I have 400 sites with 800 APs, All APs are configured for HA as primary, secondary and Tertiary controllers. Flexconnect. I want to audit and make sure that APs should have HA. To do this either I have to go to GUI and check each and ev...

Sandeep Gupta · 06-23-2015

Hello I need to use WS-C3650-48PD-EWS-C3850-48P-Eas WLC capability and to configure them as foreign and anchor . I tried to find GUI based doc to take reference. Please share any GUI based document to configure it as foreign & anchor?

Sandeep Gupta · 06-23-2015

Hello We have AIR-CT7510-K9 supporting 500 AP. As per datasheet it has 2X10Gig port however we have only 1Gig switch port on switch. Please advise solution for physical connectivity for WLC & switch with 1Gig access?

Sandeep Gupta · 06-23-2015

Hi LeoWLC is 10gig sfp capable however I need understanding on physical connectivity ..is this possible to have gig rj45 other side?

Sandeep Gupta · 09-17-2014

Hello Neil Thanks for your response, link you provided taking to me on same thread.. I checked command navigator..it gives info on basic command if I check ip ospf message-digest authentication I do not get any result looks like it is outdated..do ci...

Sandeep Gupta · 09-16-2014

Hello, I need to find IOS based on supporting command, I tried http://www.cisco.com/univercd/home/home.htm however it is not working..can anyone help for any altenative? I need to check the IOS supporting:ip ospf message-digest authenticationip ospf ...

Member Since	‎05-23-2012 12:15 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6

User Statistics

User Activity

How to find AP high Availablity

WS-C3650-48PD-E\WS-C3850-48P-E as Wireless capability

AIR-CT7510-K9 physical connectivity to 1gig rj45 switch port

Hi LeoWLC is 10gig sfp

Hello Neil Thanks for your

Hello, I need to find IOS