About bhillman

bhillman · 01-29-2019

Is there a Roadmap for features upcoming in Cisco Meeting management after version 2.5

bhillman · 07-04-2010

I have a CUCMBE version 6.1.3 that is giving me fits. I have need of sending a incoming call to a hunt pilot and (especially after hours) a call handler.I cannot get the UC to transfer a call to a call handler at all. Every call goes to the Opening G...

bhillman · 12-10-2004

I have a customer who has 2 FWSM in 6509 Chassis that have been running for over 11 months and all of a sudden the Primary stops responding to Telnet,SSH,PDM and console logins and fails over to the Secondary. After 48 hours( we were waiting for the ...

bhillman · 09-15-2003

Does anyone know of a way to have a PIX answer DNS queries either by use of a out-in static or is there a mechanism whereby the pix can actually pass a list of dns servers to hosts or anything along these lines. I have to replace a Novell Bordermanag...

bhillman · 12-30-2002

Hi All,Has anyone set IPTV up so that a user requesting a VOD file has a choice of bandwidths to choose from? Real Server has the ability to embed the player in a web page and the file can be recorded at multiple frame/data rates to facilitate this. ...

bhillman · 01-29-2011

This process requires the CET tool, which you can download from the box. I don't remember the URL but it is in the support forum.The tool requires root access which requires TAC. After you have logged in once using the appadmin account you cannot use...

bhillman · 07-05-2010

Yes your path is correct.The issue was that Connections was only recognizing 3 digits and I was trying to use 4.I changed all my extensions to 3 digits and everything works.I do need to know how to set the significant digits in Connections tho.

bhillman · 03-15-2010

Verify that the following commands are in the ASAhttp server enablehttp 0.0.0.0 0.0.0.0 inside (or whatever you named your trusted interface)This should work, you can also enable http secure server if you like, but I would try unencrypted firstalso m...

bhillman · 07-14-2008

The software is very hardware specific. You have to have the right CPU, MEMORY, RAID CONTROLLER, BIOS VERSION, DRIVE SIZE, and evern the specific RAID batery backup that is specified in the link I just sent.

bhillman · 07-14-2008

http://www.cisco.com/go/swonly

Member Since	‎12-27-2002 08:16 AM
Date Last Visited	‎10-26-2022 12:03 AM
Posts	31
Total Helpful Votes Received	3

User Statistics

User Activity

CMM Roadmap

Question about CUCMBE 6.1.3

FWSM Stops responding

Using a PIX 515 as a Proxy DNS or DNS forwarder

Cisco IPTV VOD using multiple Download rates

Re: Loat the Admin password of the UCCX8 Administration page.

Re: Question about CUCMBE 6.1.3

Re: ASA 5510 Failover works but it doesn't work

Re: Which HP server do I need to run UCM 6.1?

Re: Which HP server do I need to run UCM 6.1?