About Dieter Prinesdoma

Dieter Prinesdoma · 11-07-2012

Hi,Has anyone problems with accesspoints reboots at high client count (50+ associations per radio)We have a 5508 WLC with 7.3 Code and 3600 AP´s.Our problem is that sometimes accesspoints reboots. And this only if a lot of clients are connected.Many ...

Dieter Prinesdoma · 10-03-2012

Hi,I get an error message if i add an WLC in the Cisco PI. "Failed feature(s)feature_lldp_neighbors :SNMP request timed out"The WLC is reachable but the Inventory Collection Status is failed.Thanks in advance.

Dieter Prinesdoma · 07-03-2010

Hi,I have a problem with my 877 Router. A ping to the internet with source Atm 0.1 works. And from the internet to the 80.123.85.105 ip it is also ok.But from the lan it does´t work.I think the problem is the PAT config or a route probleme.Hope you c...

Dieter Prinesdoma · 11-07-2012

I don´t know the reason why the ap reboot. This is the problem. We monitor the Ap with nagios and we see that the ap is offine for a few minutes. So I believe the ap reboot.We found no logs on the wlc for the reason.The problem area is a congress cen...

Dieter Prinesdoma · 07-24-2010

A ping from the source vlan 1 doesn´t work. Only from the ATM 0.1.I think it is a Nat problem but i dont´t know the solution.

Dieter Prinesdoma · 07-03-2010

Thx for the answer.But it was not the solution.I have the same problem.Connenction from the router with the source ip from the atm 0.1 is ok.But not from the lan interfaceThis is the example from the current config.version 12.4no service padservice t...

Member Since	‎07-03-2010 03:12 AM
Date Last Visited	‎04-03-2024 12:05 AM
Posts	8

User Statistics

User Activity

APs reboot due to high number of clients per radio

Error Message in Cisco Prime Infrastructure 1.2

PAT with puplic ip over ADSL

Re:APs reboot due to high number of clients per radio

Re: PAT with puplic ip over ADSL

Re: PAT with puplic ip over ADSL