About nanjero_echizen05

nanjero_echizen05 · 05-20-2017

I have an HQ router connected to a ISP router with an http server. The HQ router has a nat to translate all inside networks to 1 public IP: HQ(config)#ip nat pool Public_Address 199.199.199.1 199.199.199.1 netmask 255.255.255.252HQ(config)#ip nat ins...

nanjero_echizen05 · 05-13-2017

My network looks like this: http://imgur.com/yr3VUvl. I have tried the normal way of configuring nat, that is to set the ip nat outside on the serial towards ISP and ip nat inside on the serial towards R2. I have also permitted both the serial networ...

nanjero_echizen05 · 05-13-2017

To expand on the title. I have a router connected to an ISP router with a serial connection. I am given 1 public address of 199.199.199.1. How can I use Nat overload to translate all inside network address to that one address. My serial ports have a ...

nanjero_echizen05 · 05-13-2017

I am using packet tracer with the 2901 router. This is what show up when I do the '?' command: http://imgur.com/HJXfnkW

nanjero_echizen05 · 05-13-2017

It appears this is not possible using the '?' after "ip nat inside source list 1 interface" the only options are: Ethernet, FastEthernet, GigabitEthernet and Serial. There is no option for loopback

Member Since	‎05-13-2017 12:34 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

[Packet Tracer] How to fix "Server Reset Connection"

How to set up NAT with overload on a serial connected network?

How can I translate inside networks to a different inside global address to the one assigned to my serial port using NAT overload?

I am using packet tracer with

It appears this is not